I just tried to get into the installer menu with my vivint sky system to add. Once they click unlock installer toolbox on their end, it will work again. Apparently the Installer code is 2203, BUT it must be accessed and lockout disabled within 48 hours, else the Installer code will not work, unless remotely reset by Vivint.] Installer Toolbox System Settings Cellular Networking.

.Our customers challenged us to continue innovating and to stay ahead of the competition. We answered with our Go! 2.0 platform, and this award validates our efforts. This is another game-changer for our industry. For more info on the 2GIG Go2.0 See: For more info on the 2GIG GC3 successor to the Go2.0 see: The panel's current interation currently uses a, (the current 2GIG cellular modules are also using Telit chips) and was locked down tight by Vivint to prevent takeovers. The installer code 2203, doesn't appear to work on this panel for gaining programming access.

The real issue is that the Telit module size/form is not compatible with current 2GIG modules (which use alarm.com, Telguard, and Uplink) Comparison: Current module (on left) versus Go2.0/Sky module (on right): The panel uses the same 2GIG sensors and zwave gear as the first generation go control panel, and the same alarm.com (ADC) cameras though. For those who want to install their own sensors/devices/gear, or switch this panel's monitoring to another provider, it would require replacement of the existing module, which will allow backend access to programming via alarm.com to disable lockouts and change the installer code, and grant programming access to perhaps reprovision it to use WiFi/telephone (POTS) monitoring if desired. When the 2GIG GC3 releases shortly it may use the same size/form cellular modules, if it does the SkyPanel can probably be taken over, and unlocked like the go!control first generation panel. At this time, because of the incompatible cellular module size, this cannot be done, when and if this changes, and/or when the installer code is obtained, this thread will be updated.

Keygen cracks serial key generators. So for now, your options are to replace the Sky Control panel with a first generation GoControl, or wait for the immenient release of the GC3. I just had this installed and note that it is deficient in several ways.

I was told by Vivint support that this was a *new* panel and they were still developing it. I realize you aren't Vivint, but does what you show mean that they are not going to be upgrading and upward supporting this panel software? One of their custom rules does not work on my system and most of the control (except for the thermostat) has to be manually initiaited as opposed to scheduled. This was a major disappointment for me.

I am willing to hang on for updates if they are soon in coming, but need to look at getting out of my contract if they are not. I have three days left of right of recision. What do you recommend? Otherwise, it looks like a solid system from an intrusion alarm standpoint, it is just very weak on the automation.

Also, I was told that you could add your own Z-wave devices after market. Are you saying this isn't the case? Does the older GO panel solve my issues?

Do you have any expereince with Vivint in that they will replace it with the newer panel when it becomes available? Any insight you can provide will be most welcome. Signed, Worried. Yep, you were duped.

I had vivint, If you can get out of your contract, do it, get an original GoControl, get the newest firmware, and install your own sensors/zwave gear. I created this site to make that easy to do for everyone.

As for adding your own zwave gear, try it and see. The 2GIG panels are compatible with the zwave Iris gear sold at Lowes, go get a 100db strobe/siren, appliance switch, light switch, or outlet, lock, or tstat and see. But if you don't have access to the zwave installer toolbox, then you are SOL. (Good luck with the Installer pin code, but if you do manage to get it, let me know) The thing you have to understand is that 2GIG developed the GO2.0 panel back in like 2011, and they constantly update the firmware to add bug fixes, new features, functionality, device support (including zwave device support), etc on their panels. 2GIG washed their hands with the Go2.0/Skypanel, and so you will most likely never see manufacturer support for fixes or upgrades to the firmware, or sensor/zwave support, its up to Vivint to support the panel.

Vivint isn't gonna make the panel compatible with third party gear, or give you access to toolbox installer menus (they won't make any money if you can cut them out), or even implelement bug fixes if they don't have to, I suspect. The door to door sales guys are notorious for telling a new customer any thing they want to hear in order to close a sale. Even Vivint's customers that still have the old GoControl panel are running old, outdated firmware (newest firmware is 1.12, for info, see ), but most of them are still on v1.6, v1.8, and none are running firmware above v1.9.6. The new GC3 is coming out this year, or first quarter 2015 (but Vivint customers will never get it. Vivint is committed to the Go2.0), you can always upgrade to it if you so choose, if you are a DIY'er. Not to mention that you will still have the same equipment, just no contract, and you will pay a lot less for the same.